• Experimental investigation of tri-axial self-centering ...

    This paper presents the results of shaking table tests on a tri-axial 1/2.5-scale 3-story self-centering reinforced concrete frame structure. Based on the results of this study, the following conclusions can be drawn: (1) The tri-axial self-centering RC frame structure had outstanding seismic performance even under extreme earthquakes.

  • Cited by: 14
  • Experiment on Seismic Performance of Frame-Masonry ...

    Experiment on Seismic Performance of Frame-Masonry Horizontal Hybrid Structure Based on Shaking Table Test[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 640-646. ZHENG Guochen (郑国琛), XU Hangli (许航莉), WU Yingxiong (吴应雄).

  • Shaking table test and numerical simulation of an RC frame ...

    Mar 15, 2016  Zheng Lu, Hengrui Zhang, Bin Zhao, Xianjie Li, Shaking table test and numerical simulation on vibration control effects of TMD with different mass ratios on a super high‐rise structure, The Structural Design of Tall and Special Buildings, 10.1002/tal.1470, 27, 9, (2018).

  • Cited by: 63
  • Shaking Table Test and Numerical Analysis of RC Frames ...

    A numerical analysis of RC frames with VWDs and testing with a shaking table on a three-story RC frame was performed by Lu et al. [2008] and indicated that VWDs provide significant supplemental ...

  • Shaking table experimental study of recycled concrete ...

    In this study, four 1/5 scaled shaking table tests were conducted to investigate the seismic performance of recycled concrete frame-shear wall structures with different recycled aggregates ...

  • Experiment on Seismic Performance of Frame-Masonry ...

    ZHENG Guochen (郑国琛),XU Hangli (许航莉),WU Yingxiong (吴应雄). Experiment on Seismic Performance of Frame-Masonry Horizontal Hybrid Structure Based on Shaking Table Test[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 640-646. URL:

  • SHAKING TABLE EXPERIMENT ON REINFORCED CONCRETE

    different reinforced concrete frames models namely, bare, braced, in filled, in filled with opening and frame with engineered infill wall under harmonic base excitation on shaking table is studied. The response of each frame is recorded under different frequency ratio and different excitation level.

  • Shaking Table Model Test of Steel Frame Structure ...

    A1:4 scaled model made of steel is tested on the shaking table. The SAP2000 finite element analysis software is used to analyze the elastoplastic time-history of the model and to compare the results with the experimental data. The purpose of the test is to study the dynamic characteristics of the model’s structure as well as the model’s acceleration response and displacement response in ...

  • Shaking table tests of 1:4 reduced‐scale models of masonry ...

    Mar 23, 2001  Xilin Lu, Xiaowei Yin, Huanjun Jiang, Shaking table scaled model test on a high-rise building with CFT frame and composite core wall, European Journal of Environmental and Civil Engineering, 10.1080/19648189.2013.805435, 17, 8, (616-634), (2013).

  • A shaking table real-time substructure experiment of an ...

    The equipment–structure system is adopted as experimental substructure loaded by the shaking table. Meanwhile, finite element model of soil is adopted as numerical substructure after modal reduction. An equipment–structure–soil interaction scale model is designed and tested using shaking table under different earthquake records.

  • Shaking Table Model Test and FE Analysis of a Reinforced ...

    3. EXPERIMENT. The 1/25 scaled model test was performed using the shaking table facility in the State Key Laboratory for Disaster Reduction in Civil Engineering of Tongji University, Shanghai, China.The weights of the superstructure, the attached mass and the basement are 4.5 t, 9.0 t

  • Full scale shaking table collapse experiment on 4-story ...

    In order to evaluate structural and functional performance of the steel moment frame under design-level ground motions, and to determine the safety margin against collapse under exceedingly large ground motions, full-scale shaking table test of 4-story steel building was carried out at E-defense.

  • Shaking Table Test of GFRP Reinforced Concrete Frame Structure

    Reset your password. If you have a user account, you will need to reset your password the next time you login. You will only need to do this once.

  • Experiment on Seismic Performance of Frame-Masonry ...

    Frame-masonry horizontal hybrid structure is a new type of self-built residence in the rural areas of Fujian Province in recent years. A shaking table test for 1/2 scale model is carried out on the basis of one representative rural structure, and the dynamic characteristics and seismic responses of this experimental model are measured.

  • Shaking Table Experimental Study on Diagnosis of Damage ...

    Seven different structural damage cases described by different number of columns with the reduced cross section were considered in the study. During the shaking table experiment the base of the structure was excited under the sweep-sine loading. The results of the study show a characteristic decrease in the natural frequencies with the ...

  • Aalborg Universitet Shaking Table Tests of Reinforced ...

    pared to visual damage assessment. The structures considered in the shaking table tests are 2-bay, 6-storey RC-frames in scale 1:5 with outer measures of 2.4 m in width and 3.3 m in height. The structures are subjected to a series of sequential earthquakes and after each earthquake the structure is visually inspected. The re­

  • New Page 1 [engineering.purdue.edu]

    A three-dimensional, one-story building frame will be designed and constructed for the experiment. The structure will be tested in a conventional configuration in which the building is rigidly attached to the shaking table platform (foundation) and in an alternate configuration in which the building is supported on a base isolation system.

  • Experimental Study using Earthquake Shake Table

    There are two shaking tables in the world which are large enough to test the full – scale structures, one jumbo shaking table in JAPAN and the one in USA. 1.1.1 Horizontal Shake Table In horizontal shake table the cam is connected to a variable speed motor with the help of a shaft and a fly wheel. A

  • Laboratory Shaking Table,Small shaking table

    Laboratory LY Shaking Table LY Shaking Table is one of the commonly used equipment to conduct gravity concentration for feasibility study and test of ores for labs. and small beneficiation plant. It is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal , coal and other minerals.

  • Shaking Table Test and Numerical Analysis of RC Frames ...

    Jan 01, 2008  First, a shaking table test on a large-scaled three-story RC frame with VWD and another identical three-story RC frame without any dampers was carried out. A total of three types of earthquake excitations were inputted to the shaking table to evaluate the effects of

  • Development of the Shaking Table and Array System ...

    In recent years, the structural styles of shaking table test research were developed from masonry structure, frame structure, tube structure to bridge structure, structures with the consideration of some isolation and damping measures, and structural foundation interaction experiment. The application of shaking table tests on the structure ...

  • Shaking table test and numerical simulation of 3D steel ...

    The shaking table tests was performed with 50% and 100% scaled Northridge earthquake acceleration records. A 3D FE model of the steel frame system was carried out in the Abaqus program as close as possible to the actual model. The displacement results at the top of the model were obtained by shaking table tests and the FE model analysis.

  • Seismic performances of large-span prestressed concrete ...

    Oct 18, 2012  The seismic performances of the large-span prestressed concrete frame structure of bunker bay of thermal power plant under different intensity level was investigated by shaking table tests. A 1/8 microconcrete nonfull weight scaled model was designed according to the prototype structure and the conditions of laboratory. Three kinds of scaled ground motion accelerations were

  • Shaking table tests on reinforced concrete frames without ...

    Tae‐Won Park, Lan Chung, Jinkoo Kim, Seismic performance evaluation of tall and nonseismic‐designed wall‐type structures by shaking table tests, The Structural Design of Tall and Special Buildings, 10.1002/tal.558, 20, 3, (314-326), (2009).

  • Development of the Shaking Table and Array System ...

    In recent years, the structural styles of shaking table test research were developed from masonry structure, frame structure, tube structure to bridge structure, structures with the consideration of some isolation and damping measures, and structural foundation interaction experiment. The application of shaking table tests on the structure ...

  • Shaking table test and numerical simulation of 3D steel ...

    The shaking table tests was performed with 50% and 100% scaled Northridge earthquake acceleration records. A 3D FE model of the steel frame system was carried out in the Abaqus program as close as possible to the actual model. The displacement results at the top of the model were obtained by shaking table tests and the FE model analysis.

  • Seismic performances of large-span prestressed concrete ...

    Oct 18, 2012  The seismic performances of the large-span prestressed concrete frame structure of bunker bay of thermal power plant under different intensity level was investigated by shaking table tests. A 1/8 microconcrete nonfull weight scaled model was designed according to the prototype structure and the conditions of laboratory. Three kinds of scaled ground motion accelerations were

  • Shaking table tests on reinforced concrete frames without ...

    Tae‐Won Park, Lan Chung, Jinkoo Kim, Seismic performance evaluation of tall and nonseismic‐designed wall‐type structures by shaking table tests, The Structural Design of Tall and Special Buildings, 10.1002/tal.558, 20, 3, (314-326), (2009).

  • Set Your Table for a Sweet and Sticky Earthquake Shake ...

    For example, build, test, and compare structures shaped like an "L," a "T," an "O," a rectangle, and a square when all shaken on gravel. Build a different kind of shake table that can imitate the motion of another type of seismic wave, such as a surface wave. The sources in the credits will show you how.

  • Shaking Table Test of the Taiwanese Traditional Dieh-Dou ...

    This article attempts to explore the dynamic behavior of traditional Dieh-Dou timber structure under different combinations of structural forms and vertical loads. Using time-history record (TCU 084) from the Chi-Chi earthquake, two semi full-scale specimens (Symmetric and Asymmetric) were tested.

  • Shaking Table Tests of Dou-gong Brackets on Chinese ...

    Full-scale shaking table tests of the Dou-gong model made of Douglas fir were conducted to explore the dynamic behavior of the whole structure, the deformation of the different layers, and the weak spots of the model. EXPERIMENTAL Materials The full-scale configuration of the Dou-gong specimen used in

  • Shaking Table Model Test and Seismic Performance Analysis ...

    2.3. Model Constructing. Since the aim of the shaking table test is to investigate the seismic behavior of the original structure subjected to different intensity of earthquakes, including failure mode and mechanisms, it is necessary to use the same materials as the prototype building.

  • How to Build a Mining Shaker Table Sciencing

    You can build a mining shaker table of the sort used by gold prospectors to separate the metals of choice from other constituents of what they have mined. Old ones were made out of pulleys, whereas modern one are powered by electricity. A DIY shaker table can be made in various styles.

  • Faking quakes at full scale: Giant shake tables simulate ...

    By Timothy Oleson. On a muggy day in mid-July 2009, a lone seven-story condominium complex northwest of Kobe, Japan, was violently shaken by seismic forces similar to those that struck Northridge, Calif., in 1994 — only stronger. Onlookers watched the 23-unit, wood-frame tower sway and bounce while, inside the building, furniture toppled and plates clattered to the floor.

  • Earthquake-resistant structures - Wikipedia

    Earthquake-resistant or aseismic structures are designed to protect buildings to some or greater extent from earthquakes.While no structure can be entirely immune to damage from earthquakes, the goal of earthquake-resistant construction is to erect structures that fare better during seismic activity than their conventional counterparts. According to building codes, earthquake-resistant ...

  • SHAKING TABLE DEMONSTRATION OF DYNAMIC RESPONSE

    three-dimensional, one-story building frame is used in the experiments. The structure is tested in a conventional configuration in which the building is rigidly attached to the shaking table platform (foundation) and in an alternate configuration in which the building is

  • Shaking Table Test and Numerical Analysis of RC Frames ...

    Jan 01, 2008  First, a shaking table test on a large-scaled three-story RC frame with VWD and another identical three-story RC frame without any dampers was carried out. A total of three types of earthquake excitations were inputted to the shaking table to evaluate the effects of

  • Chapter 16 Analysis of Statically Indeterminate Structures

    A different situation arises in the simple truss shown in Fig. 4.7(b) where, as we saw, ... minacy of structures since we shall require the degree of indeterminacy of a structure ... inspection. For example, the portal frame in Fig. 16.1 has a degree of external statical indeterminacy of 3, while the truss of Fig. 4.7(b) has a degree of ...

  • Faking quakes at full scale: Giant shake tables simulate ...

    By Timothy Oleson. On a muggy day in mid-July 2009, a lone seven-story condominium complex northwest of Kobe, Japan, was violently shaken by seismic forces similar to those that struck Northridge, Calif., in 1994 — only stronger. Onlookers watched the 23-unit, wood-frame tower sway and bounce while, inside the building, furniture toppled and plates clattered to the floor.

  • Earthquake-resistant structures - Wikipedia

    Earthquake-resistant or aseismic structures are designed to protect buildings to some or greater extent from earthquakes.While no structure can be entirely immune to damage from earthquakes, the goal of earthquake-resistant construction is to erect structures that fare better during seismic activity than their conventional counterparts. According to building codes, earthquake-resistant ...

  • SHAKING TABLE DEMONSTRATION OF DYNAMIC RESPONSE

    three-dimensional, one-story building frame is used in the experiments. The structure is tested in a conventional configuration in which the building is rigidly attached to the shaking table platform (foundation) and in an alternate configuration in which the building is

  • Shaking Table Test and Numerical Analysis of RC Frames ...

    Jan 01, 2008  First, a shaking table test on a large-scaled three-story RC frame with VWD and another identical three-story RC frame without any dampers was carried out. A total of three types of earthquake excitations were inputted to the shaking table to evaluate the effects of

  • Chapter 16 Analysis of Statically Indeterminate Structures

    A different situation arises in the simple truss shown in Fig. 4.7(b) where, as we saw, ... minacy of structures since we shall require the degree of indeterminacy of a structure ... inspection. For example, the portal frame in Fig. 16.1 has a degree of external statical indeterminacy of 3, while the truss of Fig. 4.7(b) has a degree of ...

  • National research Institute for Earth science and Disaster ...

    Shaking experiments of damage free reinforced concrete bridge pier were conducted at E-Defense. The bridge pier specimen was designed based on the current design specifications, however, the specimen had two special attributes, one was a new material, polypropylene fiber mixed reinforced cementitious composite, used to enhance the ductility capacity of the pier base where the severe damage ...

  • Advances in Mechanical Engineering 2017, Vol. 9(10) 1–12 A ...

    soil interaction system to a shaking table real-time sub-structure experiment. An equipment–structure–soil interaction scale model is designed, in which the struc-tural model features a four-story steel frame and the equipment is simplified into a single-DOF model. The equipment–structure system is adopted as experimental

  • Shaking Table Model Test and FE Analysis of a Reinforced ...

    Shaking Table Model Test and FE Analysis of a Reinforced Concrete Mega-Frame Structure with Tuned Mass Dampers Qing 1Jiang1,2, Xinzheng Lu *, Hong Guan3 and Xianguo Ye2 1 Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing, 100084, P.R. China;

  • The Results of Shaking Table Test and Dynamic Response ...

    maximum load measured in all experiments on Structure 2 was 4.90 kN, when the experiment of pulling the third story was performed. Also the maximum displacement of the top of the frame measured was 61.4 mm (1/75 rad.), when the experiment of pulling the top of the frame was performed. 3.2.2 Procedure for determining the hysteresis characteristics

  • Experimental Identification Of Shaking Table

    The fourstory steel frame can be simplified into a fourDOF shear model. In this manner, the equipmentstructure system forms a fiveDOF calculation model." In shaking table substructure experiment, a singleDOF model is used as equipment in experimental substructure. The fourstory steel frame can be simplified into a fourDOF shear model.

  • Earthquake Shake Table Experiment (build a shake table ...

    Oct 24, 2017  There are several different experimental techniques that can be used to test the response of structures to verify their seismic performance, one of which is the use of an earthquake shaking table ...

  • Effectiveness of tune mass damper in the reduction of the ...

    three different structures subjected to nine actual earthquake records. He found that TMD ... A shaking table testing of a 16.6 t five storey steel frame structure with and tuned mass damper (TMD) named as Tuned Mass Control System (TMCS) installed at the top has been ...

  • Double-Curvature Test of Reinforced Concrete Columns Using ...

    This paper proposes a new test setup to study the double-curvature behavior of reinforced concrete (RC) columns using shaking table. In this setup, the seismic action is simulated by the horizontal movement of a long-heavy rigid mass sitting on the top of only one test specimen.

  • Shaking table experiment on a steel storage tank with ...

    Shaking table tests The experiment was carried out using the 4×4 m shaking table installed in the State Key Laboratory for Disaster Reduction in the Department of Civil Engineering, Tongji University, China. 3.1 Scaling factor Storage liquid tanks are used in chemistry, petrochemistry and other industries and are an important piece of equipment.