• An Experimental Investigation on Concrete by Partial ...

    The authors concluded that both fine and coarse aggregates in separate combinations will replace the steel slag but can not be substituted for fine or coarse aggregates in a single mix. They indicated that steel slag could be used more advantageously as a coarse aggregate rather than as a supplement for fine aggregate.

  • Replacement of Aggregates by Industrial Waste Steel Slag ...

    Steel slag is currently used as aggregate in hot mix asphalt surface applications, but there is a need for some additional work to determine the feasibility of utilizing this industrial by-product more wisely as a replacement for both fine and coarse aggregates in a conventional concrete mixture.

  • Author: Ketaki Kulkarni, V. S. Shingade
  • STUDY ON CONCRETE USING STEEL SLAG AS COARSE

    It was concluded that replacing some percentage of coarse aggregate with steel slag enhances the strength. The results showed that replacing about 60 percent of steel slag aggregates for coarse aggregate and 40 percent of ecosand for fine aggregate will not have any adverse effect on

  • Experimental Investigation Of Coarse Aggregate With Steel ...

    replacement of coarse aggregate, fine aggregate and cement. Its performance as a coarse aggregate replacement has been found to be non-satisfactory because of strength regression and expansion due to alkali-silica reaction. The research shows that there is strength loss due to fine aggregate substitution also. Efforts have been made in

  • Partial Replacement Of Fine Aggregate Using Steel Slag

    various replacement level of steel slag with fine aggregate. The use of steel slag aggregates in concrete by replacing natural aggregates is a most promising concept. Steel slag aggregates are already being used as aggregates in asphalt paving road mixes due to their mechanical strength, stiffness, porosity, wear resistance. II. MATERIALS USED

  • (PDF) Properties of Concrete Manufactured Using Steel Slag

    This paper aims to study experimentally, the effect of partial replacement of coarse and fine aggregates by steel slag (SS), on the various strength and durability properties of concrete, by using ...

  • Study on replacement of coarse aggregate by steel slag and ...

    The optimum percentage of replacement for fine aggregate (FA)by steel slag is 40% and for coarse aggregate(CA) by steel slag is 30%, beyond which the compressive strength decreases on further ...

  • Replacement Of Coarse Aggregate To Steel Slag Using Scc ...

    Replacement Of Coarse Aggregate To Steel Slag Using Scc. Mix with steel slag as a partial replacement of fine aggregate by steel slag at various percentage replacements of fine aggregates the following conclusions are made strength of selfcuring concrete is more when compared with conventional concrete selfcuri. Chat Online

  • replacement of arse aggregate to steel slag - MC World

    2016-07-20 In this study, the use of steel slag as fine and/or coarse aggregate in concrete is investigated. For this purpose, 12 different concrete mixtures with different water/cement ratios of 0.40, 0.55 and 0.70 which include steel slag aggregate as fine and/or coarse aggregate are prepared.

  • Replacement Of Coarse Aggregate To Steel Slag Using Scc ...

    Replacement Of Coarse Aggregate To Steel Slag Using Scc. Mix with steel slag as a partial replacement of fine aggregate by steel slag at various percentage replacements of fine aggregates the following conclusions are made strength of selfcuring concrete is more when compared with conventional concrete selfcuri. Chat Online

  • Partial Replacement of Steel Slag Aggregates in Concrete ...

    Dec 31, 2018  Arjun S., Hemalatha T., Rajasekaran C. (2019) Partial Replacement of Steel Slag Aggregates in Concrete as Fine Aggregates (Induction Blast Furnace Slag). In: Das B., Neithalath N. (eds) Sustainable Construction and Building Materials. Lecture Notes in Civil Engineering, vol 25. Springer, Singapore. First Online 31 December 2018

  • replacement of arse aggregate to steel slag - MC World

    2016-07-20 In this study, the use of steel slag as fine and/or coarse aggregate in concrete is investigated. For this purpose, 12 different concrete mixtures with different water/cement ratios of 0.40, 0.55 and 0.70 which include steel slag aggregate as fine and/or coarse aggregate are prepared.

  • Performance of Steel Slag as a Partial Replacement Fine ...

    The optimum percentage of replacement of fine and coarse aggregate by steel slag is found. Workability of concrete gradually increases, as the percentage of replacement increases. Yet when beyond 20% of replacement, it starts to decrease, which is found by using slump test.

  • steel slag as a partial replacement in fine aggregate

    replacing aggregate (coarse and fine) with that of slag on various concrete properties. The ... a waste industrial byproduct of iron and steel production provides great ..... and fine aggregate in all concrete applications either as partial or full... >> Get Quotation

  • EXPERIMENTAL INVESTIGATIONS ON PARTIAL

    • To study the possibility of using steel slag as coarse aggregate replacement in concrete. • To study the feasibility of utilization of eco-sand as fine aggregate replacement material along with steel slag as coarse aggregate replacement material in concrete and to

  • STEEL SLAG AS A POTENTIAL REPLACEMENT MATERIAL FOR COARSE

    The aggregates typically account about 75% of the concrete volume and play a substantial role in different concrete properties such as workability, strength, dimensional stability and durability, Conventional concrete consists of sand as fine

  • Usage of steel slag in concrete as fine and/or coarse ...

    In this study, the use of steel slag as fine and/or coarse aggregate in concrete is investigated. For this purpose, 12 different concrete mixtures with different water/cement ratios of 0.40, 0.55 and 0.70 which include steel slag aggregate as fine and/or coarse aggregate are prepared.

  • Study on the partial replacement of fine aggregate using ...

    containing steel slag aggregate after high temperature exposure studied the properties of four steel slag based concrete mixtures with different types of cement pastes prior and after heating up to 800°C. The percentage replacement of fine aggregate using steel slag was adopted to be 60 percent. Dolomite based concrete mixture

  • A STUDY ON COMPRESSIVE STRENGTH OF CONCRETE

    percentage steel slag and quarry dust to be replaced is found out by conducting 7days and 28 days compressive strength on cubes of size 150 mm x150mmx150mm with 20%, 40%, 60%, 80% and 100% replacement of coarse aggregate by steel slag and fine aggregate by quarry dust. To study the strength loss, weight loss characteristics of concrete.

  • Properties of Concrete Manufactured Using Steel Slag ...

    This paper aims to study experimentally, the effect of partial replacement of coarse and fine aggregates by steel slag (SS), on the various strength and durability properties of concrete, by using the mix design of M20 grade. The optimum percentage of replacement of fine and coarse aggregate by steel slag is found.

  • Experimental Investigation of Fibre Reinforced Concrete ...

    Steel slag was found to be the best replacement for natural aggregates of concrete. Steel slag which is produced as a waste material in the steel industry and has a negative impact on environment when disposed. In the course of future project work by the replacement of steel slag for the coarse aggregate in concrete of 25%, 50%, 75% 100% with ...

  • Experimental Study On Partial Replacement Of Fine ...

    partial replacement of coarse and fine aggregates with steel slag and steel mill scale will increases the strength of about 30% to 50%. The main aim of this research was to study the behavior of concrete and changes in the properties of concrete with steel slag and steel mill scale by replacing the use of natural aggregates.

  • Experimental Investigation On Partial Replacement Of ...

    Dec 18, 2015  Experimental Investigation on Partial Replacement of Natural Fine Aggregate by Steel Slag and Natural Coarse Aggregate by Waste Limestone Aggregate in Cement Concrete (IJSRD/Vol. 3/Issue 09/2015/106)

  • Properties of Concrete Manufactured Using Steel Slag ...

    This paper aims to study experimentally, the effect of partial replacement of coarse and fine aggregates by steel slag (SS), on the various strength and durability properties of concrete, by using the mix design of M20 grade. The optimum percentage of replacement of fine and coarse aggregate by steel slag is found.

  • Experimental Investigation of Fibre Reinforced Concrete ...

    Steel slag was found to be the best replacement for natural aggregates of concrete. Steel slag which is produced as a waste material in the steel industry and has a negative impact on environment when disposed. In the course of future project work by the replacement of steel slag for the coarse aggregate in concrete of 25%, 50%, 75% 100% with ...

  • Experimental Study On Partial Replacement Of Fine ...

    partial replacement of coarse and fine aggregates with steel slag and steel mill scale will increases the strength of about 30% to 50%. The main aim of this research was to study the behavior of concrete and changes in the properties of concrete with steel slag and steel mill scale by replacing the use of natural aggregates.

  • Experimental Investigation On Partial Replacement Of ...

    Dec 18, 2015  Experimental Investigation on Partial Replacement of Natural Fine Aggregate by Steel Slag and Natural Coarse Aggregate by Waste Limestone Aggregate in Cement Concrete (IJSRD/Vol. 3/Issue 09/2015/106)

  • Use of Steel Slag in Concrete as Fine Aggregate

    Portland cement, as fine and coarse aggregates, to name a few. But steel slag has a negative impact on the environment when disposed. In that case wide variety of use of steel slag becomes relevant. Along with the diversified uses, steel slag efficiently replaces natural aggregates both coarse and fine

  • What material can I use as a replacement of coarse ...

    Dec 19, 2018  It is advisable to not replace gravels with other consituents as possible as you can. Ofcourse coarse aggregates can be replaced with broken concrete debris however we are compromising the quality of resultant concrete upto some level that doesnt ...

  • DESIGN AND INVESTIGATION OF STEEL SLAG AS A PARTIAL ...

    of 0, 10, 20, 30, 40, and 50% of both fine and coarse aggregates by steel slag. Whole study was done in two phases, i.e. replacement of normal crushed coarse aggregate with crystallized steel slag and replacement of natural fine aggregate with granular steel slag. This project shows that replacing of

  • Converting Granulated Blast Furnace Slag into Fine Aggregate

    JSW Steel Ltd, Vijayanagar Works, Toranagallu, Karnataka, India ... fourths of the volume of concrete is occupied by coarse and fine aggregates. Coarse . ... [11-14] recommend the usage of granulated BF slag as replacement of river sand in the range of 50 - 75 %. This difference is due to the variation in the quality of BF slag sand being used ...

  • STUDY ON CONCRETE USING STEEL SLAG AS COARSE

    coarse aggregate and fine aggregate by Steel slag and Ecosand of 60% and 40% respectively. For durability tests, other sets of cube samples (size, 150 mm) from Steel slag and Ecosand replaced concrete with replacement of coarse aggregate and fine aggregate by SA and ES of 60% and 40%respectively were

  • Experimental Investigation on Partial Replacement of ...

    Experimental Investigation on Partial Replacement of Natural Fine Aggregate by Steel Slag and Natural Coarse Aggregate by Waste Limestone Aggregate in Cement Concrete Md Zeeshan1 Prof. Rohan S Gurav2 Prof. Brij Bhushan S3 Prof. Maneeth P D4 1M. Tech Student 2,3,4Assistant Professor 1,2,3,4Department of Construction Technology

  • Standard Specification for Steel Slag Aggregates for ...

    Abstract. This specification covers crushed steel slag coarse and fine aggregates suitable for use in bituminous paving mixtures. The coarse and fine aggregates shall consist of hard, tough, durable pieces of steel slag, and shall be processed, as necessary, by crushing or screening, or both, and magnetic separation for the removal of metallics.

  • Steel Slag as a Partial Replacement of Fine Aggregate In ...

    This test is conducted by replacing steel slag at a level of 10%, 20%, 30% and 40% after 7, 14, 28 and 50 days of curing for an M35 grade of concrete. Table 5.Avg.Tensile strength test results for M35 grade of concrete Sr. No Percentage Replacement of Fine Aggregate by Steel Slag Average Flexural Strength for M35. (N/mm 2) 28 DAYS 1. 0% 4.073

  • Evaluation of steel slag coarse aggregate in hot mix ...

    Steel slag used in paving mixes should be limited to replace either the fine or coarse aggregate fraction, but not both, since hot mix asphalt containing 100% steel slag is susceptible to high void space and bulking problems due to the angular shape of steel slag aggregate.

  • ISSN- 3221 5687, (P) 3221 568X An experimental ...

    crystallized granular aggregates. The coarse aggregate were partially replaced by steel slag of about 10% and 20%. The fine aggregate were partially replaced by steel millscale of about 40%and 50%. This partial replacement of coarse and fine aggregates with steel slag and steel millscale will increases the strength of about 30% to 50%.

  • Experimental Investigation on Partial Replacement of ...

    Experimental Investigation on Partial Replacement of Natural Fine Aggregate by Steel Slag and Natural Coarse Aggregate by Waste Limestone Aggregate in Cement Concrete Md Zeeshan1 Prof. Rohan S Gurav2 Prof. Brij Bhushan S3 Prof. Maneeth P D4 1M. Tech Student 2,3,4Assistant Professor 1,2,3,4Department of Construction Technology

  • Standard Specification for Steel Slag Aggregates for ...

    Abstract. This specification covers crushed steel slag coarse and fine aggregates suitable for use in bituminous paving mixtures. The coarse and fine aggregates shall consist of hard, tough, durable pieces of steel slag, and shall be processed, as necessary, by crushing or screening, or both, and magnetic separation for the removal of metallics.

  • Steel Slag as a Partial Replacement of Fine Aggregate In ...

    This test is conducted by replacing steel slag at a level of 10%, 20%, 30% and 40% after 7, 14, 28 and 50 days of curing for an M35 grade of concrete. Table 5.Avg.Tensile strength test results for M35 grade of concrete Sr. No Percentage Replacement of Fine Aggregate by Steel Slag Average Flexural Strength for M35. (N/mm 2) 28 DAYS 1. 0% 4.073

  • Evaluation of steel slag coarse aggregate in hot mix ...

    Steel slag used in paving mixes should be limited to replace either the fine or coarse aggregate fraction, but not both, since hot mix asphalt containing 100% steel slag is susceptible to high void space and bulking problems due to the angular shape of steel slag aggregate.

  • ISSN- 3221 5687, (P) 3221 568X An experimental ...

    crystallized granular aggregates. The coarse aggregate were partially replaced by steel slag of about 10% and 20%. The fine aggregate were partially replaced by steel millscale of about 40%and 50%. This partial replacement of coarse and fine aggregates with steel slag and steel millscale will increases the strength of about 30% to 50%.

  • Effect of Steel Slag as Partial Replacement of

    Replacement Level of Fine Aggregate by Steel Slag in Concrete, 7. Ansu John and Elson Johne (2015)-Study on the partial replacement of fine aggregate using induction furnace slag. ISSN : 23200847 p- -ISSN : 2320 0936 Volume-4 pp-01-05. 8. Gaurav Singh(2015) Study of Granulated Blast Furnace Slag as Fine Aggregates in Concrete for

  • EXPERIMENTAL INVESTIGATION ON REPLACEMENT OF

    replacement of steel slag as both fine aggregate and coarse aggregate can be done. Further investigation on resistance of concrete with steel slag aggregates to attack by sulphates, acid, and alkali silica reactions, carbonation, harmful chemicals and resistance to high temperatures can be carried out.

  • STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN

    STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN TERMS OF HIGH STRENGTH CONCRETE Anurag Jain *1, Sandeep Gupta*2 Mayank Gupta*3 * Civil Engineering SIRTE, BHOPAL M.P. (INDIA) DOI: 10.5281/zenodo.1165760 ABSTRACT The Steel slag, a result of steel making, is delivered amid the detachment of molten steel from polluting influences

  • partial replacement of fine aggregate by slag sand

    Steel slag as partial coarse aggregate replacement and Eco-sand as partial fine aggregate replacement entails economical, technical and energy saving benefits. To ascertain its technical feasibility to incorporate in concrete production, a study on its strength is needed. 1.4.2. Objective The objective of the present study is

  • UTILIZATION OF CUPOLA SLAG IN CONCRETE AS FINE AND

    furnace. The cupola slag in the form of fine and coarse aggregates is shown in Fig.1. The mix proportions for M20 and M25 grades are shown in Table 2. Figure 1(a) Fine aggregate Figure 1(b) Coarse aggregate Table 2 Mix Proportion for M20 and M25 Grade of concrete Cement Fine aggregate Coarse aggregate M20 1 1.205 3.245 M25 1 1.01 2.732 3.

  • Experimental Study on Partial Replacement of Fine ...

    effective percentage of replacement of fine aggregate by steel slag is then found forM20 grade concrete. Name of the Quantity of the material Fine Aggregate with Coarse Aggregate Water 1 Cube 1.5 1.98 4.92 0.75 Sl.no Name of the mould Quantity of the material Cement ‘kg’ Fine Aggregate with steel slag Coarse Aggregate Water

  • Strength Behaviour of Geopolymer Concrete by Partial ...

    of steel slag by partially replacing coarse aggregate in flyash based geopolymer concrete. The mechanical and flexural properties were tested with steel slag in proportions of 10%, 20%, 30% and 40% in geopolymer concrete after 3, 7 and 28 days of curing.

  • Steel Slag - User Guideline Asphalt Concrete - User ...

    INTRODUCTION. Steel slag can be processed into a coarse or fine aggregate material for use in dense- and open-graded hot mix asphalt concrete pavements, (1,2,3) and in cold mix or surface treatment applications. (4) Proper processing of steel slag and special quality-control procedures are extremely important in selecting steel slag for use in asphalt paving mixes.

  • Study on Strength Properties of Concrete by Partially ...

    2 Nominal size of aggregate 20mm E. Steel slag In this study Steel slag with specific gravity 3.10 is used for replacement of fine aggregates. The steel slag is shown in Figure Fig 6.1.Steel slag F. Water The quality of mixing water for concrete has a visual effect on the resulting hardened concrete. Impurities